Freezer Not Working (Green and Red Light Off)

Freezer Not Working (Green and Red Light Off)

  • Issue: The freezer is completely non-operational, and both indicator lights (green and red) are off.
  • Steps to Resolve:
    1. Check Battery Voltage Display:
      • If there is no voltage displayed, the battery might be off. Turn on the battery using the red switch.
    2. Verify Load Switch:
      • Check if the load switch (black/silver switch) is off. If it is, switch it on.
    3. Inspect Load Cable:
      • Ensure that the load cable is properly connected.

      • Related Articles

      • Red Indicator Light On, Freezer Not Working

        Issue: The red light is on, but the freezer is not functioning. Steps to Resolve: Check Battery Voltage: For 12V systems, 10.8V-11.5V indicates a low battery. For 24V systems, 22V-23.5V indicates a low battery. Inspect PAYGO Display Screen: If the ...

      • Green Light Flashing Intermittently

        Issue: The green light turns on and off intermittently. Steps to Resolve: Check Battery Voltage: For 12V systems, 10.8V-11.5V indicates low battery; the system might be trying to charge. Adjust Thermostat Control: If set to COOL, turn the control and ...

      • Freezer Not Cooling

        Issue: The freezer is not cooling despite being operational. Steps to Resolve: Check Indicator Lights: Ensure the freezer is actually working. Inspect Battery Percentage: Confirm if the battery is well charged. Adjust Thermostat Setting: Set the ...

      • Freezer Making Strange Noise

        Issue: The freezer is emitting unusual noises. Steps to Resolve: Check Freezer Position: Ensure the freezer is well balanced and properly positioned. Turn Off Freezer: Switch the freezer off for 30 minutes to 1 hour to allow the compressor to ...

      • Freezer Shutting Down Early

        Issue: The freezer shuts down earlier than expected. Steps to Resolve: Check for Rain: Advise the customer to connect to the grid during rainy seasons as the battery might not charge well. Inspect Thermostat Position: If set to deep, adjust it to ...